How To Place Content In Postcards
The PostalMethods postcard has - prepare for a big surprise - two sides:
This is the side on which you would usually find colorful images of ski slopes, tigers in the savanna, the Eiffel tower or Niagara Falls. Another definition is the side on which the address and stamp are NOT located. Textual and/or image content may be placed anywhere on this side of the postcard.
Multiple postcards are printed on a large sheet of paper and are later cut to their final size. The cutting knives might deviate slightly and miss the intended cutting line. To make sure your postcard looks at its best in any scenario, use the following design instructions:
Indicates the line aimed at by the cutting knives. When accurate, the postcard size is exactly 4.25 inch high and 6 inch wide.
Indicates the maximum "outbound" deviation. The maximum size of the postcard may be 4.5 inch high and 6.25 inch wide. For this reason, the image designed to be placed on the Image Side should have this physical size. If the image is smaller, the original white color of the postcard may be visible.
Indicates the maximum "inbound" deviation. The minimal size of the postcard may be 4 inch high and 5.75 inch wide. For this reason, important content that must be visible to the recipient should not be placed outside the Safe Area. To be on the safe side, it is recommended to add another 1/8 of an inch on each side, making the safe area 3.75 inch high and 5.5 inch wide.
This is the side on which the address and stamp are placed. Typically, the recipient postal address appears at the bottom-right area and the stamp at the top-right area. Textual or image content may be placed at the left side of the Address Side.
The bottom area of the postcard is reserved for the postal barcode and may not be used for placing content. The main content area on this size begins on the top left corner, 0.375" from both the left and top borders of the card. Its size is 3.375 inch high and 3.125 inch wide.
The size of the provided document should be the full size (4.5" x 6.25") of the card and include the content that goes in the content portion (3.375" x 3.125"). PostalMethods prints the document on the card and then covers the reserved areas - barcode, postal address and indicia (postage). The recipient address that was provided in the Web Service call is then printed in its designated area.
Consider using the provided postcard templates.